Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the pro arrives.
Get your free estimateFast, Reliable Garage Door Parts Across Henderson
If a part on your Henderson garage door has failed, we can help you identify it, price the fix, and get the right replacement in place. Most spring and roller repairs in Henderson run $110 – $340, and we quote a flat, written price before any work starts. We know this city’s doors well, from the builder-spec steel on the 3-car garages off Green Valley Parkway to the carriage-house styles tucked into Seven Hills. That local knowledge matters, because a parts swap here is rarely just about the part. Call us at (888) 402-1096 and we’ll tell you what’s likely wrong and what it costs to set right.
Why Servo Garage Doors Whitney Is Henderson’s Preferred Garage Door Parts Company
Henderson homeowners research before they call, which we respect. Our technicians have up to 11 years of experience, and every visit closes with a documented photo record of the failed component and the completed work, so you can see exactly what was found. That’s Clause 4 of The Haven Standard, and on a Henderson door it means you get a picture of the broken torsion spring before anyone quotes the replacement, not a verbal description after the fact.
We answer the phone live, 24 hours a day, including holidays and emergency calls. If you’re in zip code 89052 near Anthem or 89002 over by Lake Mead Parkway, we can talk through the symptom right now and give you a written scope before we arrive. Every job is quoted flat and up front, per Clause 1, and covered by our 365-Day Done Right Promise: if it’s not right, we make it right.
Our reputation in Henderson is built on that paper trail, not on claims. We serve all eight major brands, we bring a free second opinion to any written estimate you’ve gotten elsewhere, and we never pressure a same-day decision. For garage door parts work around Henderson, that’s the whole offer.
Styles & brands we work with
- Raised-panel steel
- Carriage house
- Modern flush
- Full-view glass
- LiftMaster openers
- Chamberlain openers
Our Garage Door Parts Services in Henderson

Torsion Spring Repair
The torsion spring is the wound coil above the door that carries its weight; when it breaks, the door gets heavy and dangerous fast. In Henderson’s west- and south-facing 3-car garages, summer heat and constant cycling wear these springs to their limit. Repair runs $180 – $340, with a written price before we touch anything.
Rollers & Hinges
Dry desert air and blowing dust grind grit into rollers and hinges faster than you’d see in a humid climate, so doors start binding and dragging. Roller replacement in Henderson runs $110 – $220. We replace the worn rollers and lubricate the hinges so the door rolls quiet and even again.
Cables & Drums
The cables and drums on either side of the door work with the spring to lift and lower it safely. A frayed cable or a worn drum can drop a door without warning, so we inspect both on every spring call. Cable repair in Henderson runs $130 – $250.
Extension Spring Service
Older Henderson homes, especially the 1990s – 2000s tract build in Green Valley and MacDonald Ranch, often still run extension springs mounted along the side tracks. We match the replacement to the door’s weight and give you a written scope before the work begins. Call us to talk through what your door has.
Weatherstripping & Bottom Seal
A worn bottom seal lets in dust from monsoon wind events and, in an HOA community, looks rough from the street. We fit seals that match your door’s profile and keep the desert grit out.
Before
AfterTrusted Brands We Service in Henderson
We service all eight major brands, and the ones you’ll see most on Henderson doors are Clopay, Amarr, Wayne Dalton, and Craftsman. Most of that is builder-grade steel from the tract and master-planned subdivisions, but plenty of homes carry a premium carriage-house door that needs the exact panel or finish. We don’t claim to stock parts on a truck. Instead, we identify the failed component, source the matching part, and keep the turnaround tight, with a written price and scope before anything starts.
Common Garage Door Parts Problems We See in Henderson Homes

- Sun-faded, chalky steel panels. The brutal desert sun bakes west- and south-facing doors in 89052 and Anthem until panels chalk and fade, and the replacement panel has to match the neighbor’s discontinued builder paint code exactly. Finding that code is half the job.
- Opener straining on a hot afternoon. A motor that runs hot and labors in Henderson is usually a tired torsion spring that can no longer carry the door’s weight, not an opener fault. We check door balance and the spring before anyone quotes a new opener.
- Dry, gritty rollers and hinges. Desert dryness and dust from monsoon wind events dry out rollers and hinges and grind grit into the tracks, so 1990s – 2000s tract doors start binding and lose balance.
- Cooked photo-eye sensors and wiring. Heat-stressed openers and sun-baked photo-eye wiring on exposed doors quit working, and the fix is usually the sensor and its wiring rather than the whole unit.
How Henderson’s Heat and HOA Rules Shape a Parts Job
Here’s what sets a Henderson parts call apart. In covenant-controlled communities like 89052 and Anthem, swapping a garage door part is often less about the broken part and more about color and profile matching. The replacement panel or bottom seal has to match the builder-spec palette the HOA architectural committee already approved, so our technicians spend as much time tracking down a discontinued builder paint code as turning wrenches. A generic parts page won’t tell you that, and it changes what a job actually involves.
Picture the typical call. On a west- or south-facing 3-car garage somewhere in a Henderson master-planned subdivision, the sun bakes a builder-grade steel sectional door until the panels chalk and fade and the opener motor runs hot. The homeowner notices the door dragging or the opener straining, but the real culprit is usually a tired torsion spring that can no longer carry the door’s weight. A qualified local tech confirms door balance, checks the drums, cables, and end bearing plates, and matches any new spring to the door’s weight and cycle rating, then verifies the replacement panel or weather seal matches the HOA’s approved color and profile before closing out the job.
See the difference
Before
After
Before
After
Before
AfterPricing for Garage Door Parts in Henderson, NV

You should see real numbers before you call, not a promise to “contact us for pricing.” Here are the ranges we work from in Henderson, quoted flat and in writing before any work starts.
| Service | Price Range |
|---|---|
| Spring Repair | $180 – $340 |
| Roller Replacement | $110 – $220 |
| Cable Repair | $130 – $250 |
What moves the number within a range? Door weight, spring cycle rating, whether the drums and cables need replacing alongside the spring, and the cost of matching a specific panel or seal. If a quote from another company looks high, bring it to us for a free second opinion and we’ll tell you what we see.
We Also Serve Cities Near Henderson
Our work in the region reaches beyond the city line. We serve homeowners in Boulder City, Whitney, Paradise, and Enterprise, and if you’re searching for Garage Door Parts in Henderson or the surrounding communities, our Garage Door Parts team can help. Same flat, written pricing, same documented photo record, same live phone coverage.
Serving Henderson, NV – Our Local Coverage Area

We serve Henderson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Garage Door Parts in Henderson
Often yes, and matching the color and profile is a real part of the job. In Henderson’s covenant-controlled communities, we track down the builder’s paint code or a close confirmed match before ordering, so the replacement panel clears the architectural committee. Call us at (888) 402-1096 with your door’s details and we’ll tell you what we can source.
Because the opener is usually a symptom, not the cause. On a desert-exposed door, a tired torsion spring that can’t carry the door’s weight forces the motor to labor and run hot. A qualified technician checks door balance and the spring first. Call us for an exact quote; estimates are free.
Once a year is a good rhythm in Henderson, where dry air and blowing dust wear rollers and hinges down faster than in humid climates. If your door binds or rolls rough, roller replacement runs $110 – $220. Call us to schedule a look.
We service all eight major brands, including Clopay, Amarr, Wayne Dalton, and Craftsman, which covers most doors in Henderson’s master-planned subdivisions. If you’re unsure what you have, we identify it from the door and hardware. Call (888) 402-1096 for an exact quote.
Yes on both counts. A fresh bottom seal that matches your door’s profile keeps out the dust from monsoon wind events and looks clean from the street, which is what the HOA committee sees. Call us and we’ll quote a written price before any work starts.
Get a Written Price on Henderson Garage Door Parts

If a part on your door has failed, we’d rather show you the range and the plan than have you guess. Tell us the symptom, and we’ll talk through what’s likely wrong, what it costs, and what we’d do, all before anyone touches the door. We answer the phone live around the clock, and every job closes with a documented photo record and our 365-Day Done Right Promise. Call (888) 402-1096 for a free estimate.
Written by the team at Servo Garage Doors Whitney.